SurgeX SX1213i Surge Eliminator & Power Conditioner
SurgeX SX1213i Surge Eliminator & Power Conditioner
Description
The SX1213i shall be a one-rack-space unit in a magnetic shielding steel enclosure. It shall operate from 230 volts AC and have a 9-foot power cord. There shall be 10 earthed AC receptacles on the back panel, with 8 switched and 2 always on. In addition, there shall be a single always-on receptacle on the front panel. Overall dimensions shall be 4.5cm x 48.3cm x 26.7cm (1.75"H x 19"W x 10.5"D) .Weight shall be 5Kg (11 Lbs).
The SX1213i shall have a load rating of 13 amps at 230 volts, a self-test circuit with visual indicator, and provide EMI/RFI filtering. It shall meet Grade A, Class 1, Mode 1 guidelines for powerline surge suppressors and withstand at least 1000 occurrences of surge pulse voltages up to 6000 volts.
Specifications
FEATURES
Magnetic shielding steel enclosure
9' power cord
10 earthed AC receptacles on rear panel (8 switched, 2 always on)
1 earthed AC receptacle on front panel
Advanced Series Mode® surge protection
Advanced impedance Tolerant® EMI/RFI filtering
Thermal circuit breaker overload protection
Self-test circuit with visual indicator
10-year warranty
Engineered in the U.S.A.
SPECIFICATIONS
Load Rating: 13 amps @ 230 volts
Power Requirement (no load): 3 watts
Surge Let-Through Voltage (6000-volt surge): 0 volts
IEC/EN; 61643-1 Performance Rating: Grade A, Class 1, Mode 1
EMI/RFI Filter, Normal Mode (50-ohm load):
40dB @ 100kHz; 50dB @ 300kHz; 50dB @ 3MHz; 50dB @ 30MHz
EMI/RFI Filter, Common Mode (50-ohm load):
18dB @ 300kHz; 30dB @ 1MHz; 50dB @ 5MHz; 50dB @ 20MHz
Maximum Applied Surge Voltage: 6000 volts*
Maximum Applied Surge Current:
Unlimited, due to current limiting*
Maximum Applied Surge Energy:
Unlimited, due to current limiting*
Endurance (C62.41-1991 Category B3 pulses):
1 kV>500,000; 3kV>10,000; 6 kV>1000
Dimensions: 1.75"H x 19"W x 10.5"D (4.5 x 48.3 x 26.7cm)
Weight: 11 lbs (5.0 kg)
Temperature Range: 5° to 35° C
Humidity Range: 5% to 95% R.H., non-condensing
